I started with the lighter background area behind the waterfall. Before starting work on the main quilt I made a small experimental post card sized piece to try out the technique I wanted to use.

Once all the pieces were fused in place, I added free motion stitching to give greater depth and create the impression of foliage. I then started to build up the layers of rock using invisible machine applique.

Of course, as usual I had my feline ‘helper’ making stitching a little difficult at times.

With the background now completed it is time for the fun part….adding all the details and embellishments. So far I have started adding a few snippets to give the effect of foliage in the areas surrounding the waterfall. These have been fused in place and then once I am happy with  the arrangement I will add free motion stitching and some couched yarns.

For the waterfall I used some fine tulle which I shaped into folds to give the impression of flowing water and held in place with a free motion zig zag stitch and invisible thread then further free motion stitching and rayon thread. Behind the tulle I added a layer of angelina fibres to add a bit of sparkle.

The waterfall before being stitched down. I will next start to add rocks and foliage to the foreground.

I drew out a pattern in EQ7 and then I decided I would try out the design in a small format as fabric post cards.

For the small design I had some bright green batik fabric which I’d had a while and not used because it was less tightly woven than normal batik and I’d always thought it  a bit flimsy, but it worked fine for this project. For the larger piece I used some beautiful hand dyed fabric by Heide Stoll-Weber which I’d bought at the Festival of Quilts this year. I was a little reluctant to cut into it so soon but the fabric was so perfect, with all  the subtle colour variations, I had to use it.

I assembled the ferns using a non stick pressing sheet before fusing them to the background fabric. I then used a fine satin stitch round all the edges.

Detail of the stitching and quilting

The design is inspired by a traditional native Iban pattern which I drafted in EQ6 and then played around with to make my own original design. As you can see from the pattern below I still have a long way to go to complete the project.

I changed the colour from my original pattern to use a striking red batik on a black mottled background. Here in the drafted pattern I have just plain borders but when I finally reach that stage I might decide to do something more elaborate, but I think that will be a while yet.

I am hand stitching the design using needleturn applique and silk thread. It’s a slow process but it’s something I enjoy doing and the good thing about it is that I can just pick it up and do it at any time.

The power did eventually come on again around 10.30 in the morning, by which time I had done quite a bit of sewing, but it was beginning to warm up and get sticky.

The original design was inspired by a piece of Indonesian commercial printed batik sarong fabric  that I bought locally here in Brunei. I’d originally planned to use it for patchwork but I felt that the design was too nice to cut up but it took me a long time before I finally made it into an applique pattern.

The original piece of batik from which I made the pattern

Once I’d made the pattern the challenge was to choose the colours that I would use for the applique as I didn’t want to use the rather dull brown, black and white of the original. I chose a dark blue, almost black mottled hand dyed batik fabric for the background and pale pastel colours for the flowers, stems and leaves.

The tail feathers and wings were quite a challenge.

The two birds amongst the flowers

The image above shows the design that I drew out in EQ6, ready to be made into an applique pattern. I decided to use invisible machine applique for this project as the pieces were large enough for the edges to be turned under, so I printed freezer paper templates and contstructed the bird before adding it to the background.

 It was quite similar to make to a hornbill but the biggest challenge was getting the colouring and markings on the beak. I searched through my piles of fabric and found two different batiks which blended blues and yellows. I then added the details using fabric pens. I also added a little touch of colour where the yellow feathers join the black.

For the background I chose a lovely hand dyed fabric by Frieda Anderson that I bought at the Festival of Quilts last year. Sometimes I find it hard it’s hard to cut into these special fabrics, but in the end I have to tell myself that I bought them to be used and they really do help to give  a special touch to the finished design.

The finished wall hanging, quilted with a variegated cotton thread in the background and a solid coloured thread for the borders.

A more detailed photo of the finished wall hanging.

Other people chose to feature green fabrics in their work and I was one of those, as it’s my favourite colour and I enjoy working with greens. For my project I created a foundation pieced background of ‘crazy’ blocks which I printed out from EQ6. I then used invisible machine appliqué to add a jungle plant, spilling out into the borders. In the latter stages I was racing against the clock to get the challenge finished by the end of the month but I just managed.

Quilting with variegated and solid coloured cotton threads completes the design. Initially I started to quilt a trailing leaf design in the borders but then had to unpick what I’d done as I felt that it didn’t look right and drew too much attention away from the main design.

inspiration photographs and some of the fabrics I've chosen.

Most of the fabrics I use are batiks or hand dyes, because of the subtle colour variations which I can use to replicate the patterns of the rocks in the background and foreground.

starting to build up the designMolly watching the progress of the waterfall

Building up the background for the waterfall using a variety of different batik and hand dyed fabriccs.  For the area at the back of the waterfall I used a preprinted fabric and used fabric pens to emphasise the trunks and branches of the trees.

I’ve used invisible machine applique to construct this top, first making templates from freezer paper which I iron on to the right side of the fabric.  I clip the seams, brush the edges with liquid starch, then turn under the edges using the tip of an iron. It is time consuming but I prefer this method to ironing the freezer paper on the wrong side and glueing the edges because this way I don’t have freezer paper to remove after. I also prefer the look of turned under edges.

For the waterfall I used a batik fabric as the base, then added details using Shiva paintstiks and Angelina fibre. The rocks are all added individually and I have turned under the edges of each one. It’s a slow process but little by little I’m getting there.

adding the rocks to the foreground.

Little by little I am adding all the rocks, then the next step will be to add some foliage to the foreground and background.

I start with a freezer paper template which I iron onto the right side of my gecko fabric. My favourite fabrics are batiks because they are tightly woven and fray less and also because of their  gorgeous colours and patterns.

freezer paper template

I draw round the template using a white fabric marker pen which disappears with heat or water or if I’m using a pale fabric I’ll use permanent fabric marker. I leave the template in place while I cut out roughly round the design. I prefer to leave it there until after I’ve cut it out because it’s easier to handle and you’re less likely to snip into the design by mistake.

I next pin the gecko in place on my background fabric, using fine or short pins. Short pins are good because the thread doesn’t get caught up on them so much.

applique shape pinned to background fabric

I use YLI silk thread and a #11 ‘sharp’ needle to hand stitch the gecko, the silk thread is so fine that it is much easier to make small and almost invisible stitches. I cut a piece of thread 16 – 18 inches long and make a knot in one end. People often want to use too long a piece of thread to avoid having to thread the needle so often, but this isn’t a good idea because the thread gets tangled and tends to shred. I trim the seams as I go along and because I am using a firmly woven fabric I can use very narrow ones without fear of them fraying. I usually trim them to less than a ¼ inch, especially around the toes of the gecko.

Getting started. The knot is buried in the seam and folded edge held in place with thumb.

To start, insert the needle from the back of the appliqué shape and bring it up on the right side at the point where you want to start sewing. It’s easiest to start on a straight edge so with my geckos I always start on the body part.

Wooden toothpick used to turn under edge

Fold over the edge of the appliqué along the seam line, my favourite tool for this is an ordinary wooden toothpick because the slightly rough edge catches the fabric and makes it much easier to turn under. Use the toothpick to smooth the turned under edge and then I use my thumb to hold it in place. I make a straight stitch into the background fabric at the point where I brought the needle out of the appliqué, and then make a very short stitch bringing the needle up through the folded edge. Continue in this way all round the edge of the appliqué shape.

 For sharp inner curves, such as where the body meets the legs, or the gecko toes, I clip right to the seam line, but on a gentle inner curve like the tail I just make small snips within the seam allowance. I never clip outside curves.

This is how the stitching looks from the wrong side.

Another finished gecko wall hanging

I was going through my stash of browns and autumnal colours looking for fabric to complete another project when one of the batiks caught my eye and I thought it would be just right for my leaves. I just added a simple border as I felt the design didn’t need anything else.

The colours of the border fabric compliment the colours I have used in the leaves. I quilted in the background using a fine black 50wt cotton thread and because there is no quilting on the leaves they stand out well from the background. I used a thicker variegated cotton 40wt thread in the borders.

Detail of the leaf rubbing and quilted background

Close up showing thread painting on the flower and butterfly

 I did all the embellishment before adding batting and backing because I wanted the butterfly to stand out from the background. These photos show the design with the quilting completed because the original photos I took didn’t come out very well thanks to a nice smeary finger print across the lens of my camera.

thread painitng on the butterfly and flower

So once this was complete I sandwiched it all together and then began the quilting. I didn’t want the quilting in the background to stand out and draw attention away from the butterfly so I used a fine 50wt cotton thread which blended well into the hand dyed fabric which I used for the background. For the borders I used a thicker variegated thread and a trailing leaf pattern.

The finished wall hanging